ECCPP 4PCS 5x100mm to 5x112mm Conversion Wheel Spacers Adapters 1 inch fits for 2003-2021 for Toyota for Corolla 2003-2014 for Toyota for Matrix 1986-2005 for Toyota for Celica

Compatibility List Included : Wheel Spacers Adapters 5×100 to 5×112 57.1mm bore Fit for 2003-2006 for Baja 2013-2015 for BRZ
Installation with Confidence : NEED TO INSTALL AFTERMARKET WHEEL IN 5×112 BOLT PATTERN,NOT FIT Stock Rims. Wheel Spacers Adapters 5 LUG with VEHICLE BOLT PATTERN: 5x100mm WHEEL BOLT PATTERN: 5x112mm THICKNESS: 1″ THICK THREAD PITCH: 12×1.5 INNER DIAMETER: 57.1mm Studs GRADE: 10.9 ;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
Excellent Driving Experience : Our 1″ 5 lug Wheel Adapters CHANGE YOUR BOLT PATTERN FROM 5X100 TO 5X112.Provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
Strict Quality Performance : 1 INCH WHEEL SPACERS Adapters WHEEL SPACERS Adapters 1 INCH 5 lug The 25mm WHEEL SPACERS HUBCENTRIC are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.CNC automatic processing ensures high accuracy and stability. These forged 6061 t6 aircraft aluminum wheel spacers are stronger
Check before You Purchasing : 5×100 to 5×112 WHEEL SPACERS Adapters Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12×1.5mm threads; 2) You have more than 1 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 57.1mm,advise torque specs at 70-80 Ft/Lbs